Hardware

Plug In. Light Up. Build.

RadarFlow runs on a Raspberry Pi 5 and connects to leading radar sensors. Flash the image onto your own Pi today — fully-installed kits coming soon — then plug in a supported sensor and stream live data in minutes (actual setup time varies with your hardware and network).

The Appliance

RadarFlow runs on a Raspberry Pi 5.

The RadarFlow appliance — a Raspberry Pi 5 beside its sealed enclosure
Connect a sensor and power — typically streaming live radar within minutes.

The full capture-and-processing pipeline runs on the appliance itself — no host PC. You drive it from any browser, on your laptop, iPad, or phone, and deploy it anywhere: bench, vehicle, or field.

Coming soon

Get a fully-installed kit

Prefer it turnkey? A pre-built appliance you can order, preconfigured with an AKM AK5818 radar sensor — power it on and you're streaming.

Runs on a Raspberry Pi 5 today · Nvidia Orin Nano support on the roadmap.

Supported Sensors

Then connect a radar sensor.

The appliance streams from leading radar sensors. Start with the AKM AIMEZ-V — supported today; TI, Infineon, and Novelda are in development. The sensor is separate — buy it from the vendor and plug it in.

AKM AK5816 / AK5818

Supported

Asahi Kasei Microdevices (AKM)

Start here — the best-supported sensor today for presence, vitals, gesture, and tracking work. Unboxing to live range-Doppler data and HDF5 captures typically takes minutes.

60 GHz FMCW with 4Tx/4Rx channels for strong angular separation, 7 GHz of bandwidth for fine range resolution, and 3D point clouds computed on-chip (per vendor specifications). The dev kit offers USB, Ethernet, Wi-Fi, and BLE interfaces per its datasheet.

Dev Kit: AIMEZ-V

TI IWRL6844EVM

Supported

Texas Instruments

For teams whose training data must come straight from the ADC — when supported, it will pair with TI's DCA1000 capture card for raw capture. 60 GHz FMCW with 4Tx/4Rx channels and 29° angular resolution for separating targets by angle.

Dev Kit: IWRL6844EVM

Novelda X7 Radar Direct

Coming Soon

Novelda

The UWB impulse option: a ~180° field of view covers a whole room from one sensor. Radar Direct mode gives raw baseband data through an API, and dual transceivers support beamforming and angle estimation.

Dev Kit: X7F202 Development Kit

Infineon BGT60TR13C

Coming Soon

Infineon Technologies

The compact choice: antennas are built into the package, so there's no antenna design on your side. 60 GHz FMCW with 5.5 GHz bandwidth for fine range resolution, and a 1Tx/3Rx L-shaped array that measures both azimuth and elevation.

Dev Kit: DEMO-BGT60TR13C

Don't See Your Sensor?

Request Sensor Support

We're adding new radar sensors regularly. If your sensor isn't listed yet, let us know — we'll prioritize it based on demand.